Upcycling

Purrific Candy Cats: Upcycled Halloween Candy Tray

3 Comments

While I was out thrifting yesterday, I picked up this great little wicker tray with a hard unfinished wooden bottom, and two handles. This tray was stamped underneath as made by Corning.  It was a bit of a mystery as to what this tray was used for in its current state.  It was certainly priced right and stamped with a red tag marked 50% off and cost only $1.00.

Mystery Wicker Tray

I had an idea since it is close to Halloween to repurpose this item into a Halloween candy tray.  Using a flat tray instead of a deep one, enables the kids to pick the candy that they like best.  I had some great left over Halloween themed spooky black cat fabric I purchased at Joann Fabric.  The same fabric I used for DIY Upcycled Decorative Halloween Lamp.  I gathered the materials needed for this project.

Wooden Tray

Mod Podge

Black Acrylic Paint

Spooky Halloween Fabric

Paint Brush/Fine Tipped Marker

Foam Craft Brush/Scissors

First, I painted the tray areas that would not be covered by fabric with a medium-sized paint brush,  I used a couple of coats and allowed it to dry thoroughly between coats.

Painted Tray

Once dry, I traced the bottom of the tray on to the back of the fabric with the black fine tipped marker.  I carefully cut the fabric out with a pair of scissors.  I placed the fabric aside and applied Mod Podge to the tray surface with a foam craft brush.  I carefully placed the fabric on the tray surface and smoothed out any wrinkles with my hands.  I allowed this to dry and then applied Mod Podge over the painted areas, and the fabric surface.

Upcycled Halloween Candy Tray-Black Cats

Now the hubby and I can pass out candy in spooky black cat style! This can also be used as a serving tray for ghastly goodies. What crafts do you have planned this Halloween?

Halloween Tray made with Mod Podge

Repurposed Decoupage Photograph Shadow Box

4 Comments

I was very excited recently, when I received my prize in the mail from Ray’s Sew Crafty‘s Labor day giveaway.  A lovely book filled with different designed scrapbook paper. I was eager to use this paper on a project and share it with all of you.  Once again I want to send a big thank you to Diana at Ray’s Sew Crafty. Be sure and stop by and check out her blog!

Labor Day Giveaway

 

I had a set of three different sized black shadow box shelves that I wasn’t sure what to do with.  I decided to repurpose the medium-sized shelf into a photo shadow box.  I gathered my materials:

Shelf

Scrapbook paper

Photo

Mod Podge/Foam craft brush

Hot Glue Gun

Black Fine Tipped Marker and Scissors

I traced the four sides of the shelf with a black marker.  I cut the tracings out with a pair of scissors and placed them aside.  I applied Mod Podge to the outside of the shelf with a foam brush, and carefully applied the scrapbook paper to the outside.  Once dry, I applied Mod Podge over the top of the paper to seal it.  I used the hot glue gun to carefully glue the photo to the back, leaving a small space at the top if I decided to hang it on the wall.

Photo Shadow Box

 

I wish the edges had come out better, as I accidentally touched them before they were dry! Overall I loved the project and what a wonderful way to display a favorite photograph!

Sports Fan Inspired Upcycled Laundry Room Folding Table

3 Comments

My husband and I have been working on each room in the house, cleaning reorganizing and coming up with new ideas for old items.  One of the areas that needed attention was our basement/laundry area. Our basement is damp and unfinished and keeping it clean is quite a challenge. It also serves as our laundry area.  We have a table in our basement we used in our kitchen for many years. We now use the table for folding and basement storage.  When we moved into our home six years ago, our kitchen was too small for such a large table so it was delegated to the basement.

DSC_0909

I am blessed to have a husband that helps with the household chores, especially the chores I hate!  One of these chores is doing laundry and he graciously does the family laundry every Sunday evening.  He is also a huge Phillies fan through good times and bad. While we were grocery shopping, we came across a Philadelphia Phillies plastic table-cloth in a bargain bin. It was priced right at $1.69.

DSC_0912

I thought it would be great to redo the grungy basement table into a Phillies fan table, and a great way to thank the hubby for all of the laundry he does!  My only concern was that the table cover was plastic.  As stated in previous posts, Mod Podge doesn’t always adhere well to certain plastics.  I thought this would be a great experiment as I had never used a plastic table-cloth for decoupage.  First, I cleaned and painted the table surface with a white latex primer.  This was important because the table cloth was white and the brown surface could potentially bleed through the white table-cloth.

DSC_0911

Once the paint was dry, I generously applied Mod Podge to the table surface with a large paintbrush.  I carefully layed the table cloth on top of the Mod Podge table surface.  This was the most challenging aspect of the project as the table cloth material is thin and prone to wrinkles and air bubbles.  The table cover also is spread across a larger surface area.  I smoothed out the table cover as best I could and applied Mod Podge over the top of the cover and allowed it to dry. I used scissors to carefully trim away the excess table cover hanging over the edges.

DSC_0915I used two coats of a polyurethane clear coat to seal the table surface, I allowed the first coat to dry for 4 hours and the second was left to dry over night.  I applied additional Mod Podge to the edges to prevent any minor curling.  This project was certainly not without its challenges, but despite these I think it turned out great.  The hubby may have lost his sports room to a playroom, but his laundry room is on its way to becoming a surrogate man cave!

Phillies sports Fan Table decoupage table cover

Upcycled Coffee Cans and Glass Jars

1 Comment

It has been a hectic few weeks and my upcycling ways have suffered a bit.  My free time has consisted of some travel, household chores, decorating for fall and getting my craft space in order.  I have a few projects in the works, but lately I feel like I am coming up mostly empty-handed during my Goodwill lunches.   During these lean crafting times, I try to work on the craft room.   I am hoping to share it one day, but alas it is far from finished.  I am still finding ways to organize supplies, and just hung some shelves: Progress!

A great way to organize paint brushes and general supplies are old coffee cans and glass jars.  I like to cover them with fabric using Mod Podge.  Glass covered jars not only make great lamps, they also are a decorative way to organize craft room supplies. Simply measure the fabric, cut,  and apply the Mod Podge and fabric to the outside of the coffee can.

DSC_0106

DSC_0754

Similar method can be used to apply fabric to glass jars, such as pickle jars, and spaghetti jars.  The possibilities and uses for these items are endless, and it is a great way to repurpose and recycle throw away items. What’s better than craft room storage for free?

For The Kid In All Of Us: Upcycled Justice League Of America Adult Fan Chair

4 Comments

Poor abused dinner table chair!  I managed to spill paint on it,  drip hot glue on it, and just made a general mess out of it.  It became a place to craft on with the intention that one day, I would give it a new life.  I have a set of four that belonged to the kitchen table we owned previously.  The table was broken, but we kept the chairs.  They are about as basic as it gets, similar to the one picture below.

Windsor ChairWhen I finished the Kids Justice League Of America Chair a few people including the hubby, suggested I create an adult version for all the “grown up” Justice League fans out there. This chair seemed like a good candidate for a super hero makeover.  The chair was heavily lacquered so a white latex primer was a must! Once primed, I trimmed and applied the print to the seat surface.  I found a great image featuring The Justice League Of America characters.  These characters had a more adult feel.  I used Mod Podge to adhere the image to the seat with a coat of Mod Podge applied over top to seal.  I then painted the entire chair with Red, White and Blue acrylic paint. This was the most labor intensive part of this project and required multiple applications of paint, but proved therapeutic after another stressful week.   I applied Mod Podge to the entire painted area of the chair to seal it.

Decoupage Justice League Chair

Super Hero Fan Chair

Upcycled Super Hero Chair

To make a “Super” Chair you will need:

Old chair

Comic book pages or printed image

Acrylic paint

White latex primer spray or brush on

brushes, scissors

Mod Podge

Fredrika Fabric Corner Shelf Makeover: A Final Farewell

3 Comments

I was a bit sad when I realized I was running out of one of my favorite thrift store finds,  Fredrika Fabric from Ikea. It is amazing when I think of all the great projects restyled with this fabric, most of which currently reside in our daughter’s playroom.  Ahh the upcycling memories.  First it was a little wooden step stool, then many more followed, lost basement table, 1960’s Coffee Table, Repurposed Umbrella Holder/Toybox and even a Garden Pig Makeover!

We needed a shelf in the playroom out of our daughter’s reach.  We had a great baseball lamp my sister gave to us as a gift, and we needed a place to display it on. The playroom still has a sporty theme coupled with a girly mod look.  I found this great corner shelf at Goodwill for $2.99 and I snatched it up!

DSC_0649

I had just enough fabric to cover the surface with a few scrap pieces to spare. I traced the shelf on the fabric and cut the tracing with a pair of scissors.  I applied Mod Podge to the shelf surface and carefully placed the fabric on top.  Once dry, I applied Mod Podge over it to seal it.

DSC_0650

The most difficult part of this project was hanging the shelf!  It had 3 slots which required three screws hung on the wall precisely.

DSC_0653

I love how this turned out and so simple to make!  You can “jazz” up ordinary furniture and decor and make it a unique expression of your own personal home style!  This project was certainly bitter-sweet.  I will miss you.  Farewell Fredrika!

It’s Raining Black Cats: DIY Upcycled Decorative Halloween Lamp

6 Comments

Hands down, Autumn is my favorite time of year.  From Pumpkin coffee to homes decorated with colorful mums, It is apparent fall is here and Halloween is just around the corner.  What better way to celebrate the most fun and certaintly most spookiest of holidays than with an upcycle craft celebrating All Hallows Eve?

I visited Joann Fabric and picked up some festive material featuring very scary black cats in different poses.  I thought the orange-colored background would look nicely when the lamp light shines through it.

DSC_0746

Materials:

Halloween fabric of choice

Small lamp base

Dollar Store Glass Vase (You can also use a glass jar)

Mod Podge

Scissors/Paint Brush/thin tipped black marker

Twine/String

First, I wrapped the fabric around the outside of the vase and trimmed with scissors.  I traced the bottom of the glass vase on the back of the fabric.  I cut the circle of material out and placed it aside,  I applied Mod Podge to the outside of the glass with a brush and carefully wrapped the material around it smoothing it out with my hands.  I cut a piece of twine off the spool and tied it around what would be the base of the lamp.  Doing this helps add a decorative touch and holds the fabric in place while drying,

DSC_0747

I  stood the vase up and applied the last piece of fabric to what would be the top of the lamp.  Once applied, I covered the entire outside with Mod Podge.

DSC_0750

Once the piece was dry, I added one additional coat of Mod Podge to the lamp and fabric.  What is great about these lamps is the capability to use one lamplight base and switch out different decorated glass jars and vases to create new decorative lighting looks.

DIY Decorative Halloween lamp made with Mod Podge and fabric

Hope you enjoy my festive feline Halloween lamp!  ahhh I can taste the candy corn now!

Restyled Polka Dot Cutting Board

2 Comments

I have a glass cutting board I used for cutting paper and crafts.  I have several cutting boards, and did not have a use for this one in the kitchen so,  I used it for crafting on and cutting paper.  I was sitting at my work station one day and decided to “dress it up” a little.  I had this great black and white polka dot scrapbook paper.  Since the cutting board was made from a clear glass, the idea was to adhere the paper to the back, and allow the polka dot image to appear through the glass without affecting the usable surface.

DSC_0642

I applied Mod Podge to the back of the cutting board  with a foam craft brush and adhered the scrapbook image facing out. I then trimmed the paper around the glass.  I carefully matched the polka dots up so the pattern appeared as seamless as possible.  I applied Mod Podge on the back of the paper to seal it.  If I were to use this as a real cutting board, I would use outdoor Mod Podge to seal the back for added protection.  This cutting board will be used for cutting, but not used around water so I used Mod Podge matte finish to seal it.

DSC_0645

Just think of the possibilities!  It also would make a nice decorative piece also if not used as a cutting board.  You could Mod Podge any image and photos behind the glass!

Pretty As A Peacock: Side Table Redesign

4 Comments

I picked up this side table at Goodwill.  I loved the design qualities it had, but this piece was in poor shape.  Most of the finish was worn off, and it had issues with sturdiness.  Due to these shortcomings, this table was priced right at only $3.99.

DSC_0655

 

It sat for a while collecting dust.  I wanted to do something really special with it, but my vision was stifled.  I used it to work on projects, but this table certainly deserved a more dignified life, A trip to Jo Ann Fabrics changed everything.  They have a new super store less than a mile from home and it stocks row upon row of fabric.  I came across a beautiful peacock inspired fabric.  It made me think of the side table and I decided to buy about a yard of it.  I liked it so much I wanted to have extra to use in a future project or two. It felt nice to treat myself a little, plus I had a 40% off coupon!

I took the table outside cleaned it, and tightened it up as best I could. I used a can of white spray primer to prepare the table for painting.

DSC_0659

Once dry I brought it  back inside the house to the craft room.  I flipped the table over tracing the table on the back of the fabric with a black fine tipped marker twice, once for the top surface and once for the middle shelf.  I cut the fabric with scissors.  I applied the Mod Podge on both shelves and carefully place the fabric down, smoothing it out with my hands,  I applied Mod Podge over top and allowed it to dry,  Any excess fabric, I trimmed with a box cutter knife.  I also applied extra Mod Podge to the corners where the fabric meets the table .

DSC_0684

I used two coats of black and white acrylic paint to paint the remaining areas of the table. Once the paint was dry, I used a Polyurethane clear gloss to seal the table and give it a shiny appearance.

DSC_0707

 

Before and After:

peacock table before and after

 

Want to strut your stuff and make a peacock inspired table?  Here is what you will need:

Table

Peacock inspired fabric (From Jo ann Fabric)

Mod Podge

Acrylic Paint

Spray on Primer

Polyurethane clear sealer

Box Cutter, Scissors, Fine tipped marker

Paint Brushes

 

A Much Needed Kitchen Table Makeover: “On The Upcycle” Style.

21 Comments

Our furniture sees it’s share of abuse in our home.  It would be easy to “blame it on the two-year old”, but the biggest offender in this household is me.   Before I began reorganizing what is now my crafting space, I had one place to craft on and that place was the kitchen table.  As much as I tried to be careful, with every new idea and craft came new damage to the table surface. I had to use a table cloth to cover the damage.

My husband and I originally purchased this set from Walmart before my daughter was born.   After years of living with some of the worst off the scrap heap kitchen tables.  The hubby and I decided we needed a more respectable table.  A table where a family could sit, eat and enjoy each other’s company, and not have to worry about the table collapsing while doing it!

We chose The Wood Casual Pedestal Dining Table in Black Finish sold by Walmart.  We liked the basic style and the table is very sturdy.  The table is about 3 years-old and the table itself is still in great shape.  I wish I could say the same for the table’s surface.  My fault totally!

DSC_0664

I had been putting off fixing it for quite sometime.  I was going to need a lot of Mod Podge and a clear sealer for this project!  This table would need protection against heavy use.

DSC_0662

Materials:

1 1/2 Yards of fabric (table measured 41×41)

High Gloss polyurethane sealer

Mod Podge

Scissors

Large Paint Brush

Small foam paint roller

First, I cleaned the table surface. I then covered the table surface generously with Mod Podge.

DSC_0665

I carefully, laid the fabric on the table surface allowing some fabric to drape over the sides.  You can use the Mod Podge roller tool, but now that I have been doing this for a bit, I actually prefer using my hands.

DSC_0666

I used my nail to feed the fabric into the table groove for a tight fit.  I applied a layer of Mod Podge over the top of the fabric, and on the sides. I allowed this to dry throughly.  I then used a pair of scissors, trimming off any additional fabric.

I applied additional Mod Podge to the edges shaping the fabric with my hands.  I applied three coats of High Gloss Polyurethane with a foam paint roller,  I waited about four hours between coats and the final coat was left to dry overnight,

DSC_0671

It matches Flea Market Bar Cabinet nicely and looks great in our yellow kitchen,  I was worried about the surface drying tacky, but it dried nicely.  If you want a smoother surface apply as many coats of the Polyurethane as needed until the desired effect is achieved. Since the table is shiny, I struggled to get a photo without any reflection in it!

Table Re Surface using fabric

Ruining the kitchen table never looked so good! No table cloth needed!

DSC_0676

DSC_0677