Mod Podge

It’s Raining Black Cats: DIY Upcycled Decorative Halloween Lamp

6 Comments

Hands down, Autumn is my favorite time of year.  From Pumpkin coffee to homes decorated with colorful mums, It is apparent fall is here and Halloween is just around the corner.  What better way to celebrate the most fun and certaintly most spookiest of holidays than with an upcycle craft celebrating All Hallows Eve?

I visited Joann Fabric and picked up some festive material featuring very scary black cats in different poses.  I thought the orange-colored background would look nicely when the lamp light shines through it.

DSC_0746

Materials:

Halloween fabric of choice

Small lamp base

Dollar Store Glass Vase (You can also use a glass jar)

Mod Podge

Scissors/Paint Brush/thin tipped black marker

Twine/String

First, I wrapped the fabric around the outside of the vase and trimmed with scissors.  I traced the bottom of the glass vase on the back of the fabric.  I cut the circle of material out and placed it aside,  I applied Mod Podge to the outside of the glass with a brush and carefully wrapped the material around it smoothing it out with my hands.  I cut a piece of twine off the spool and tied it around what would be the base of the lamp.  Doing this helps add a decorative touch and holds the fabric in place while drying,

DSC_0747

I  stood the vase up and applied the last piece of fabric to what would be the top of the lamp.  Once applied, I covered the entire outside with Mod Podge.

DSC_0750

Once the piece was dry, I added one additional coat of Mod Podge to the lamp and fabric.  What is great about these lamps is the capability to use one lamplight base and switch out different decorated glass jars and vases to create new decorative lighting looks.

DIY Decorative Halloween lamp made with Mod Podge and fabric

Hope you enjoy my festive feline Halloween lamp!  ahhh I can taste the candy corn now!

Restyled Polka Dot Cutting Board

2 Comments

I have a glass cutting board I used for cutting paper and crafts.  I have several cutting boards, and did not have a use for this one in the kitchen so,  I used it for crafting on and cutting paper.  I was sitting at my work station one day and decided to “dress it up” a little.  I had this great black and white polka dot scrapbook paper.  Since the cutting board was made from a clear glass, the idea was to adhere the paper to the back, and allow the polka dot image to appear through the glass without affecting the usable surface.

DSC_0642

I applied Mod Podge to the back of the cutting board  with a foam craft brush and adhered the scrapbook image facing out. I then trimmed the paper around the glass.  I carefully matched the polka dots up so the pattern appeared as seamless as possible.  I applied Mod Podge on the back of the paper to seal it.  If I were to use this as a real cutting board, I would use outdoor Mod Podge to seal the back for added protection.  This cutting board will be used for cutting, but not used around water so I used Mod Podge matte finish to seal it.

DSC_0645

Just think of the possibilities!  It also would make a nice decorative piece also if not used as a cutting board.  You could Mod Podge any image and photos behind the glass!

Pretty As A Peacock: Side Table Redesign

4 Comments

I picked up this side table at Goodwill.  I loved the design qualities it had, but this piece was in poor shape.  Most of the finish was worn off, and it had issues with sturdiness.  Due to these shortcomings, this table was priced right at only $3.99.

DSC_0655

 

It sat for a while collecting dust.  I wanted to do something really special with it, but my vision was stifled.  I used it to work on projects, but this table certainly deserved a more dignified life, A trip to Jo Ann Fabrics changed everything.  They have a new super store less than a mile from home and it stocks row upon row of fabric.  I came across a beautiful peacock inspired fabric.  It made me think of the side table and I decided to buy about a yard of it.  I liked it so much I wanted to have extra to use in a future project or two. It felt nice to treat myself a little, plus I had a 40% off coupon!

I took the table outside cleaned it, and tightened it up as best I could. I used a can of white spray primer to prepare the table for painting.

DSC_0659

Once dry I brought it  back inside the house to the craft room.  I flipped the table over tracing the table on the back of the fabric with a black fine tipped marker twice, once for the top surface and once for the middle shelf.  I cut the fabric with scissors.  I applied the Mod Podge on both shelves and carefully place the fabric down, smoothing it out with my hands,  I applied Mod Podge over top and allowed it to dry,  Any excess fabric, I trimmed with a box cutter knife.  I also applied extra Mod Podge to the corners where the fabric meets the table .

DSC_0684

I used two coats of black and white acrylic paint to paint the remaining areas of the table. Once the paint was dry, I used a Polyurethane clear gloss to seal the table and give it a shiny appearance.

DSC_0707

 

Before and After:

peacock table before and after

 

Want to strut your stuff and make a peacock inspired table?  Here is what you will need:

Table

Peacock inspired fabric (From Jo ann Fabric)

Mod Podge

Acrylic Paint

Spray on Primer

Polyurethane clear sealer

Box Cutter, Scissors, Fine tipped marker

Paint Brushes

 

A Much Needed Kitchen Table Makeover: “On The Upcycle” Style.

21 Comments

Our furniture sees it’s share of abuse in our home.  It would be easy to “blame it on the two-year old”, but the biggest offender in this household is me.   Before I began reorganizing what is now my crafting space, I had one place to craft on and that place was the kitchen table.  As much as I tried to be careful, with every new idea and craft came new damage to the table surface. I had to use a table cloth to cover the damage.

My husband and I originally purchased this set from Walmart before my daughter was born.   After years of living with some of the worst off the scrap heap kitchen tables.  The hubby and I decided we needed a more respectable table.  A table where a family could sit, eat and enjoy each other’s company, and not have to worry about the table collapsing while doing it!

We chose The Wood Casual Pedestal Dining Table in Black Finish sold by Walmart.  We liked the basic style and the table is very sturdy.  The table is about 3 years-old and the table itself is still in great shape.  I wish I could say the same for the table’s surface.  My fault totally!

DSC_0664

I had been putting off fixing it for quite sometime.  I was going to need a lot of Mod Podge and a clear sealer for this project!  This table would need protection against heavy use.

DSC_0662

Materials:

1 1/2 Yards of fabric (table measured 41×41)

High Gloss polyurethane sealer

Mod Podge

Scissors

Large Paint Brush

Small foam paint roller

First, I cleaned the table surface. I then covered the table surface generously with Mod Podge.

DSC_0665

I carefully, laid the fabric on the table surface allowing some fabric to drape over the sides.  You can use the Mod Podge roller tool, but now that I have been doing this for a bit, I actually prefer using my hands.

DSC_0666

I used my nail to feed the fabric into the table groove for a tight fit.  I applied a layer of Mod Podge over the top of the fabric, and on the sides. I allowed this to dry throughly.  I then used a pair of scissors, trimming off any additional fabric.

I applied additional Mod Podge to the edges shaping the fabric with my hands.  I applied three coats of High Gloss Polyurethane with a foam paint roller,  I waited about four hours between coats and the final coat was left to dry overnight,

DSC_0671

It matches Flea Market Bar Cabinet nicely and looks great in our yellow kitchen,  I was worried about the surface drying tacky, but it dried nicely.  If you want a smoother surface apply as many coats of the Polyurethane as needed until the desired effect is achieved. Since the table is shiny, I struggled to get a photo without any reflection in it!

Table Re Surface using fabric

Ruining the kitchen table never looked so good! No table cloth needed!

DSC_0676

DSC_0677

Just For Fun: Rainbow Brite Decoupage Tote Bag

5 Comments

I have been intrigued recently by the idea of using decoupage on purses and suitcases. This requires me to work with different materials I have not tried before, and overcoming certain obstacles such as shape, texture and overall size. I thought this tote bag would be a great practice project, and a cute item to carry/store my daughter’s toys in.

DSC_0570

Their was an overall texture to the bag and I was not sure how the Mod Podge would adhere to it. I was concerned at the possibility that the texture underneath the paper would make the decoupage appear wrinkled.  I printed out an image of the Rainbow Brite characters.  I trimmed the image with a pair of scissors.   I applied Mod Podge to the bag surface with a foam craft brush carefully smoothing out any wrinkles in the paper.  Once dry,  I applied multiple coats of Mod Podge over the image. (The more coats on synthetics/plastics, the better the bond) It appeared to adhere to the bag well, but I have been burned by plastic/synthetic surfaces before.  The Mod Podge simply does not adhere well to these surfaces. Through constant use by two year-old hands, only time will tell the durability of this project. I would guess that canvas would be a bit more “user friendly” The decoupage looks great and the surface does not appear to have affected the paper much.  I hope my toddler appreciates Rainbow Brite as much as her mommy does!

Rainbow Brite Decoupage Tote bag

Materials:

Tote bag

Print for decoupage

Mod Podge

Scissors

foam craft brush

And The Winner Is…. Me!?!

2 Comments

Good Morning to all my blogging friends!  It is a happier Monday than usual, thanks to Diana at Ray’s Sew Crafty.  I just wanted to personally thank her for making my day!  She has an amazing crafting blog, and is a lover of cats as I am!  Be sure and check it out! Diana sponsored a Labor Day Giveaway on her site and I happened to be the very lucky winner of a book of beautiful scrapbook papers (Can you say decoupage?)

Scrapbook paper winner!

Congratulations also to  Laura (from the Sew Frou Frou Quilter ) She won the cute Hugabook story book panel.

Also… If you missed it, be sure and check out my friend Elise from 2 Geeks and a Grandma at Cheeky Geeks Blog.  This month, Elise is featuring all things “Geeky”  Sci Fi, Retro you name it!  I was honored when Elise asked if I would be a guest blogger, my very first guest blogger position! My contribution is a  full tutorial on how to make a retro upcycled kids table and chair featuring an old Strawberry Shortcake record.  Be sure and stop by and check it out! Elise will be featuring all things “retro” this week.   Visit her for more to come, should be lots of fun!!

Enjoy your day my friends!

Cheeky Geeks : Geek Month Celebration

Simple Saturday: Decoupage Sports Fan Desk Clock

4 Comments

This project was quick, and easy to create.   If you have never ventured into the wonderful world of Mod Podge before, this is a great starter project for you!  A sports desk clock is also a great gift for the special man in your life or a female sports fan such as myself.  When I stumbled upon this cute little clock made from Ikea, at a Good Will store, I had no clue what if anything I was going to do with it. The price was certainly encouraging! On this day items adorned with a yellow ticket were 50% off !  This cute little item cost just 1 dollar!

Ikea Desk Clock

 

My husband suggested that since the clock was Eagles Green, it would make a great Philadelphia Eagles Football clock.  I thought this was a great idea, in honor of the new football season, and our fantasy football team who opened week one with a win thanks to McCoy and Jackson. I found some sports images online and printed them.  These would be great for decoupage and looked as though they would fit well on the surface,  The clock was a bit of an odd shape after all.

Eagles print outs

 

I cut the images out and do to space restraints used the only the eagles letters, and the larger eagle.  I used a small paint brush and applied a light coating of Mod Podge to the back of the paper cut outs and carefully applied them to the front of the clock surface.  I placed in front of the fan, and when dry added additional Mod Podge over the top of the images.  I repeated this step twice,

Mod Podge Clock

This took less than a half hour to make and came out wonderfully!

Now are you ready for some football? Well at least you’ll know when the game is starting!

Sports Fan Clock made with Mod Podge

 

 

Checkbook Cover Revival: Fabric Scraps and Mod Podge

1 Comment

Looking for an easy, fun project on a Sunday afternoon to do while you watch football?  I know I am! It has been a rough few days and I am hoping to relax on this lovely sunday and enjoy week one of the NFL games and cheer on our fantasy football team.  I have been on a small blogging hiatus, battling a nasty fall cold and continuing to go on with life as usual, work full-time, and as always, be a wife, and a mommy to a 2 year-old with an un-ending supply of energy.

It was my toddler apprentice who gave me the idea for today’s project.  My daughter was with me in our craft room the other day exploring as usual. She found some great scrap fabric to play with.  It made me think about ways I might be able to utilize these smaller fabric pieces, and then it hit me!  I had a tan checkbook cover that was in need of a revival.

I gathered what I would need:

DSC_0355

Mod Podge

Scrap Fabric

Paint Brush

Black Marker

Scissors

First, I opened the check book cover, laid it out flat and traced it onto the fabric with the black marker.  I cut the tracing, with a pair of scissors and placed aside.  I applied Mod Podge to the outside of the check book cover, generously with a paint brush.

DSC_0358

I carefully applied the fabric to the checkbook smoothing it out with my hands.

DSC_0360

I applied Mod Podge over the fabric and placed the checkbook in front of a fan to dry.

DSC_0361

I repeated this process three more times, which left a nice,  smooth finish on the cover.  I decided to leave the inside as is.  I didn’t want the paper checks to “stick” to the inside cover.  Mod Podge is attracted to paper. (as it should be!)

DSC_0365

What a great way to use fabric scraps and add a little life to your checkbook!

Growing Pains: 7 Mistakes I Have Made “On The Upcycle”

1 Comment

Tonight I thought I would, share with you all a few things I have learned the hard way through crafting, decoupaging, upcycling, and blogging.  It is certainly not as easy as it looks and I have acquired quite a few bumps and bruises along the way!

1. High Temperature hot glue guns are as advertised: 

For many years, I used a small low temperature glue gun.  As many of you already know these do not adhere as well as the high temp guns.  I thought I would treat myself, to a newer glue gun.  When I used it for the first time, I inadvertently stuck my hand into the hot  gooiness and boy did I regret it.  It didn’t just burn a little it burned A LOT, and  I adhered two of my fingers together!

High Temp Hot Glue Gun by Ad Tech

2. Mod Podge + Mod Podge =DISASTER:  Mod Podge is a magical substance, but at the end of the day it is simply a glue and adhesive.  When storing furniture made with Mod Podge it is important to not allow two pieces of furniture to be stored in such a way that they “lean” up against each other.  I once had a TV tray that was stuck to a chair, and rip!  Thanks goodness I was able to re-paint and repair the damaged tv tray! Lesson learned!

3. Decoupage over Decoupage = DISASTER:  When decoupaging, always make sure you are adhering to the “flat” original surface of a project and that the material you are using, fabric, paper, ect does not overlap with the same. This creates a uneven surface prone to wrinkles and air bubbles.  If you are decoupaging a material like paper onto a brightly colored surface be sure the material is think enough to prevent the color from “bleeding through.”

4. Treat your paint brushes as you would want to be treated:  There is nothing worse than projects ruined or further complicated by poorly cared for paint brushes with loose bristles that find their way forever embedded in a project, Or the poorly rinsed brush that streaks the wrong color across the face of a project.  Be sure and keep these clean and inspect occasionally for loose bristles. I use the method to clean my brushes illustrated here on Wiki How.

Paint Brush Cleaning

5. Have a “Crafting Happy Place”:  If possible, I have found it best to have a separate crafting space or at the very least a piece of furniture for crafting you wouldn’t mind getting a few globules of paint on.  No matter how many drop cloths, wipes and sponges you have handy accidents happen and you may not always see a paint splatter or glue glob right away.  I single-handedly over time ruined the surface of our kitchen table.  The bright side you ask? I am planning to cover it with fabric can you say a project? Stay tuned! Ok my craft room looks nothing like these, but a Upcycling Mom can have a dream right?

6.  Thinking about taking the easy way out?  Don’t do it!  Crafting may appear fun, but much of it is hard work:  sawing, cleaning, sanding, priming.  For me this is all preparation and no reward.  I want to see the finished item I envisioned; However these things are important steps often times when creating a quality project that lasts.  Not all items will require the same preparation, but one of the most important and simple steps before painting or decoupage is removing dust and dirt.

7. If at first you don’t succeed: Keep trying!  As much as the cyber blogging world is filled with wonderful people, there are also haters out there that are cruel instead of encouraging.  Always stay true to yourself and believe in what you are doing even if others don’t necessarily approve. Stay positive and don’t let a project fail stop you in your tracks! Don’t be too hard on yourself (So far this has been the toughest lesson of all, but like I said keep trying right?)

Flea Market Bar Cabinet Makeover

1 Comment

My husband and I picked up this wooden cabinet many years back at a local outdoor flea market.  It  had two mirrored bar signs glued to the door and was a perfect “novelty” cabinet for our bar.  We acquired quite a few shot glasses over time, collecting them as an inexpensive souvenirs wherever we traveled.  This cabinet was a perfect way to store them.

Now that the bar has become a distant memory in our family friendly household, this cabinet sat on the floor in our spare bedroom with the shot glasses still in it increasing the chances of something getting broken. The  signs began to fall off, so I decided to remove them all together.  I planned to restyle this cabinet and hang it in a much safer place-Our kitchen.

Image

I used a scraper, to remove the access glue front the door and cleaned the cabinet with a wet wipe.  I removed the knob and door and set aside.  The cabinet was heavily lacquered so I used a white latex sealer to prime the cabinet before getting started.

Removed door and Primed

I used fabric to cover the outside of the door and glued it to the wood with Mod Podge, I then applied a thick coating of Mod Podge with a Large brush to the top of the fabric.  Once dry, I trimmed the excess fabric away from the door with a pair of scissors.  I painted the entire cabinet with black acrylic paint except for the inside and shelves. Once dry, I applied Mod Podge over the entire piece.  I spray painted the knob white, and once everything was completely dry, I re-attached the cabinet door and knob.

I hung the cabinet in our kitchen by our table, with its much more sophisticated look, It is a great place to store our souvenir glasses!

Restyled cabinet using paint and Mod Podge

Inside wooden shelves

Materials:

Wooden Cabinet

Fabric

Mod Podge

Black acrylic paint

White latex primer

White spray paint

Small and large paint brush

Scissors

Before and After:

Cabinet Re done