Upcycle

Creative Blast Off: Star Wars Fabric Decoupage Kids Chair

5 Comments

I was in Joann Fabric recently and came across some great Star Wars themed fabric.  They were in the midst of having a huge fabric sale and I jumped at the chance to purchase something unique and fun at a discounted price.  When I brought the fabric to the counter to have it measured and cut, the clerk informed me that their was a larger scrap piece she could sell me for an additional half off!  It was my lucky day as I really only needed a half yard.  This piece was large enough to use for additional projects, and I jumped at the chance to buy it.  Two other fabrics I purchased also had discounted scrap pieces.  It was my lucky day!  Over a yard of fabric Star Wars fabric cost a mere $5.30!

Thrift Store Kids Chair

I had picked up two kids chairs during a furniture sale (shown above) at a local Goodwill store.   My first project to utilize one of these chairs was for a Strawberry Shortcake themed guest blogger project celebrating Geek Month on Cheeky Geeks Blog. I primed both chairs with a spray on white latex primer, and this chair sat for quite sometime unfinished.  It seemed a perfect fit for the Star Wars fabric.  My husband and I are like many our age, huge fan “geeks” when it comes to Star Wars. I was more than happy to base a kids chair on such a fun topic from our youth.

Trace chair seat on to fabric

I flipped the chair over on to a table and laid the chair seat upon the flip side of the fabric, tracing carefully with a black marker.  I carefully cut out the piece of fabric, along with a smaller sized piece I would use for the chair back. I applied Mod Podge to the chair seat surface with a large foam craft brush.  I then carefully laid the cut fabric on the chair with my hands smoothing it out to prevent wrinkles.  I trimmed the back of the fabric carefully where the seat back and chair back met. This enabled me to cover the seat with as much fabric as possible.  I repeated the same steps to apply the smaller piece of fabric to the chair back.  Once dry, I covered the fabric over top with Mod Podge, and allowed it to dry.

Decoupage Kids Chair

I then hand-painted the chair with red and black acrylic paint.  Like the first chair, it required quite a few coats of paint. Once dry, I painted on a coat of Mod Podge to seal it.

Star Wars Fabric Decoupage Kids Chair

Materials Used:

Old Kids Chair

Mod Podge

Star Wars Themed Fabric

Foam Craft Brush/Paint Brushes/Scissors

Black and Red Acrylic Paint

White Latex Primer

Star Wars Themed Fabric Decoupage Chair

Check out all the great licensed character themed fabrics Joann Fabric has to offer here

Fabric Decoupage Chair Seat

Repurposed Decoupage Photograph Shadow Box

4 Comments

I was very excited recently, when I received my prize in the mail from Ray’s Sew Crafty‘s Labor day giveaway.  A lovely book filled with different designed scrapbook paper. I was eager to use this paper on a project and share it with all of you.  Once again I want to send a big thank you to Diana at Ray’s Sew Crafty. Be sure and stop by and check out her blog!

Labor Day Giveaway

 

I had a set of three different sized black shadow box shelves that I wasn’t sure what to do with.  I decided to repurpose the medium-sized shelf into a photo shadow box.  I gathered my materials:

Shelf

Scrapbook paper

Photo

Mod Podge/Foam craft brush

Hot Glue Gun

Black Fine Tipped Marker and Scissors

I traced the four sides of the shelf with a black marker.  I cut the tracings out with a pair of scissors and placed them aside.  I applied Mod Podge to the outside of the shelf with a foam brush, and carefully applied the scrapbook paper to the outside.  Once dry, I applied Mod Podge over the top of the paper to seal it.  I used the hot glue gun to carefully glue the photo to the back, leaving a small space at the top if I decided to hang it on the wall.

Photo Shadow Box

 

I wish the edges had come out better, as I accidentally touched them before they were dry! Overall I loved the project and what a wonderful way to display a favorite photograph!

Sports Fan Inspired Upcycled Laundry Room Folding Table

3 Comments

My husband and I have been working on each room in the house, cleaning reorganizing and coming up with new ideas for old items.  One of the areas that needed attention was our basement/laundry area. Our basement is damp and unfinished and keeping it clean is quite a challenge. It also serves as our laundry area.  We have a table in our basement we used in our kitchen for many years. We now use the table for folding and basement storage.  When we moved into our home six years ago, our kitchen was too small for such a large table so it was delegated to the basement.

DSC_0909

I am blessed to have a husband that helps with the household chores, especially the chores I hate!  One of these chores is doing laundry and he graciously does the family laundry every Sunday evening.  He is also a huge Phillies fan through good times and bad. While we were grocery shopping, we came across a Philadelphia Phillies plastic table-cloth in a bargain bin. It was priced right at $1.69.

DSC_0912

I thought it would be great to redo the grungy basement table into a Phillies fan table, and a great way to thank the hubby for all of the laundry he does!  My only concern was that the table cover was plastic.  As stated in previous posts, Mod Podge doesn’t always adhere well to certain plastics.  I thought this would be a great experiment as I had never used a plastic table-cloth for decoupage.  First, I cleaned and painted the table surface with a white latex primer.  This was important because the table cloth was white and the brown surface could potentially bleed through the white table-cloth.

DSC_0911

Once the paint was dry, I generously applied Mod Podge to the table surface with a large paintbrush.  I carefully layed the table cloth on top of the Mod Podge table surface.  This was the most challenging aspect of the project as the table cloth material is thin and prone to wrinkles and air bubbles.  The table cover also is spread across a larger surface area.  I smoothed out the table cover as best I could and applied Mod Podge over the top of the cover and allowed it to dry. I used scissors to carefully trim away the excess table cover hanging over the edges.

DSC_0915I used two coats of a polyurethane clear coat to seal the table surface, I allowed the first coat to dry for 4 hours and the second was left to dry over night.  I applied additional Mod Podge to the edges to prevent any minor curling.  This project was certainly not without its challenges, but despite these I think it turned out great.  The hubby may have lost his sports room to a playroom, but his laundry room is on its way to becoming a surrogate man cave!

Phillies sports Fan Table decoupage table cover

Upcycled Coffee Cans and Glass Jars

1 Comment

It has been a hectic few weeks and my upcycling ways have suffered a bit.  My free time has consisted of some travel, household chores, decorating for fall and getting my craft space in order.  I have a few projects in the works, but lately I feel like I am coming up mostly empty-handed during my Goodwill lunches.   During these lean crafting times, I try to work on the craft room.   I am hoping to share it one day, but alas it is far from finished.  I am still finding ways to organize supplies, and just hung some shelves: Progress!

A great way to organize paint brushes and general supplies are old coffee cans and glass jars.  I like to cover them with fabric using Mod Podge.  Glass covered jars not only make great lamps, they also are a decorative way to organize craft room supplies. Simply measure the fabric, cut,  and apply the Mod Podge and fabric to the outside of the coffee can.

DSC_0106

DSC_0754

Similar method can be used to apply fabric to glass jars, such as pickle jars, and spaghetti jars.  The possibilities and uses for these items are endless, and it is a great way to repurpose and recycle throw away items. What’s better than craft room storage for free?

Fredrika Fabric Corner Shelf Makeover: A Final Farewell

3 Comments

I was a bit sad when I realized I was running out of one of my favorite thrift store finds,  Fredrika Fabric from Ikea. It is amazing when I think of all the great projects restyled with this fabric, most of which currently reside in our daughter’s playroom.  Ahh the upcycling memories.  First it was a little wooden step stool, then many more followed, lost basement table, 1960’s Coffee Table, Repurposed Umbrella Holder/Toybox and even a Garden Pig Makeover!

We needed a shelf in the playroom out of our daughter’s reach.  We had a great baseball lamp my sister gave to us as a gift, and we needed a place to display it on. The playroom still has a sporty theme coupled with a girly mod look.  I found this great corner shelf at Goodwill for $2.99 and I snatched it up!

DSC_0649

I had just enough fabric to cover the surface with a few scrap pieces to spare. I traced the shelf on the fabric and cut the tracing with a pair of scissors.  I applied Mod Podge to the shelf surface and carefully placed the fabric on top.  Once dry, I applied Mod Podge over it to seal it.

DSC_0650

The most difficult part of this project was hanging the shelf!  It had 3 slots which required three screws hung on the wall precisely.

DSC_0653

I love how this turned out and so simple to make!  You can “jazz” up ordinary furniture and decor and make it a unique expression of your own personal home style!  This project was certainly bitter-sweet.  I will miss you.  Farewell Fredrika!

Restyled Polka Dot Cutting Board

2 Comments

I have a glass cutting board I used for cutting paper and crafts.  I have several cutting boards, and did not have a use for this one in the kitchen so,  I used it for crafting on and cutting paper.  I was sitting at my work station one day and decided to “dress it up” a little.  I had this great black and white polka dot scrapbook paper.  Since the cutting board was made from a clear glass, the idea was to adhere the paper to the back, and allow the polka dot image to appear through the glass without affecting the usable surface.

DSC_0642

I applied Mod Podge to the back of the cutting board  with a foam craft brush and adhered the scrapbook image facing out. I then trimmed the paper around the glass.  I carefully matched the polka dots up so the pattern appeared as seamless as possible.  I applied Mod Podge on the back of the paper to seal it.  If I were to use this as a real cutting board, I would use outdoor Mod Podge to seal the back for added protection.  This cutting board will be used for cutting, but not used around water so I used Mod Podge matte finish to seal it.

DSC_0645

Just think of the possibilities!  It also would make a nice decorative piece also if not used as a cutting board.  You could Mod Podge any image and photos behind the glass!

A Much Needed Kitchen Table Makeover: “On The Upcycle” Style.

21 Comments

Our furniture sees it’s share of abuse in our home.  It would be easy to “blame it on the two-year old”, but the biggest offender in this household is me.   Before I began reorganizing what is now my crafting space, I had one place to craft on and that place was the kitchen table.  As much as I tried to be careful, with every new idea and craft came new damage to the table surface. I had to use a table cloth to cover the damage.

My husband and I originally purchased this set from Walmart before my daughter was born.   After years of living with some of the worst off the scrap heap kitchen tables.  The hubby and I decided we needed a more respectable table.  A table where a family could sit, eat and enjoy each other’s company, and not have to worry about the table collapsing while doing it!

We chose The Wood Casual Pedestal Dining Table in Black Finish sold by Walmart.  We liked the basic style and the table is very sturdy.  The table is about 3 years-old and the table itself is still in great shape.  I wish I could say the same for the table’s surface.  My fault totally!

DSC_0664

I had been putting off fixing it for quite sometime.  I was going to need a lot of Mod Podge and a clear sealer for this project!  This table would need protection against heavy use.

DSC_0662

Materials:

1 1/2 Yards of fabric (table measured 41×41)

High Gloss polyurethane sealer

Mod Podge

Scissors

Large Paint Brush

Small foam paint roller

First, I cleaned the table surface. I then covered the table surface generously with Mod Podge.

DSC_0665

I carefully, laid the fabric on the table surface allowing some fabric to drape over the sides.  You can use the Mod Podge roller tool, but now that I have been doing this for a bit, I actually prefer using my hands.

DSC_0666

I used my nail to feed the fabric into the table groove for a tight fit.  I applied a layer of Mod Podge over the top of the fabric, and on the sides. I allowed this to dry throughly.  I then used a pair of scissors, trimming off any additional fabric.

I applied additional Mod Podge to the edges shaping the fabric with my hands.  I applied three coats of High Gloss Polyurethane with a foam paint roller,  I waited about four hours between coats and the final coat was left to dry overnight,

DSC_0671

It matches Flea Market Bar Cabinet nicely and looks great in our yellow kitchen,  I was worried about the surface drying tacky, but it dried nicely.  If you want a smoother surface apply as many coats of the Polyurethane as needed until the desired effect is achieved. Since the table is shiny, I struggled to get a photo without any reflection in it!

Table Re Surface using fabric

Ruining the kitchen table never looked so good! No table cloth needed!

DSC_0676

DSC_0677

Just For Fun: Rainbow Brite Decoupage Tote Bag

5 Comments

I have been intrigued recently by the idea of using decoupage on purses and suitcases. This requires me to work with different materials I have not tried before, and overcoming certain obstacles such as shape, texture and overall size. I thought this tote bag would be a great practice project, and a cute item to carry/store my daughter’s toys in.

DSC_0570

Their was an overall texture to the bag and I was not sure how the Mod Podge would adhere to it. I was concerned at the possibility that the texture underneath the paper would make the decoupage appear wrinkled.  I printed out an image of the Rainbow Brite characters.  I trimmed the image with a pair of scissors.   I applied Mod Podge to the bag surface with a foam craft brush carefully smoothing out any wrinkles in the paper.  Once dry,  I applied multiple coats of Mod Podge over the image. (The more coats on synthetics/plastics, the better the bond) It appeared to adhere to the bag well, but I have been burned by plastic/synthetic surfaces before.  The Mod Podge simply does not adhere well to these surfaces. Through constant use by two year-old hands, only time will tell the durability of this project. I would guess that canvas would be a bit more “user friendly” The decoupage looks great and the surface does not appear to have affected the paper much.  I hope my toddler appreciates Rainbow Brite as much as her mommy does!

Rainbow Brite Decoupage Tote bag

Materials:

Tote bag

Print for decoupage

Mod Podge

Scissors

foam craft brush

Flea Market Bar Cabinet Makeover

1 Comment

My husband and I picked up this wooden cabinet many years back at a local outdoor flea market.  It  had two mirrored bar signs glued to the door and was a perfect “novelty” cabinet for our bar.  We acquired quite a few shot glasses over time, collecting them as an inexpensive souvenirs wherever we traveled.  This cabinet was a perfect way to store them.

Now that the bar has become a distant memory in our family friendly household, this cabinet sat on the floor in our spare bedroom with the shot glasses still in it increasing the chances of something getting broken. The  signs began to fall off, so I decided to remove them all together.  I planned to restyle this cabinet and hang it in a much safer place-Our kitchen.

Image

I used a scraper, to remove the access glue front the door and cleaned the cabinet with a wet wipe.  I removed the knob and door and set aside.  The cabinet was heavily lacquered so I used a white latex sealer to prime the cabinet before getting started.

Removed door and Primed

I used fabric to cover the outside of the door and glued it to the wood with Mod Podge, I then applied a thick coating of Mod Podge with a Large brush to the top of the fabric.  Once dry, I trimmed the excess fabric away from the door with a pair of scissors.  I painted the entire cabinet with black acrylic paint except for the inside and shelves. Once dry, I applied Mod Podge over the entire piece.  I spray painted the knob white, and once everything was completely dry, I re-attached the cabinet door and knob.

I hung the cabinet in our kitchen by our table, with its much more sophisticated look, It is a great place to store our souvenir glasses!

Restyled cabinet using paint and Mod Podge

Inside wooden shelves

Materials:

Wooden Cabinet

Fabric

Mod Podge

Black acrylic paint

White latex primer

White spray paint

Small and large paint brush

Scissors

Before and After:

Cabinet Re done

Decoupage your Cell Phone: Take Two

4 Comments

Back on May 28th, I posted an entry regarding decoupaging your smart phone called Crafting Is Worth The Risk.  At the time it was unknown as to how such a project would turn out.   I actually  loved it, and decided to decoupage my computer tablet as well.   I received so many compliments on my phone case!  If they only knew!  Cell phone cases can be quite expensive, and this is certainly is a thrifty way to add an artistic flare to your phone without spending a lot of money, but what happens  when you decoupage your phone, but need a change?  No problem!

I wanted to change my smart phone’s look to something more colorful.  I loved the scrapbook paper I used on my tablet.  I had a small piece of this paper left and decided to use it to update my phone’s look.  It was fairly easy to remove the old decoupage, I simply peeled it off with my fingers and cleaned the back of the phone cover and removed any of the old dried, Mod Podge.  I was surprised, because the decoupage held up amazingly well, and I didn’t think it would be so easy to remove.   I then repeated the same process I used during my initial restyle.  I removed the back of the phone, and traced this  on to the back of the paper with a pen, and using an X-Acto knife I carefully trimmed the areas such as the speaker and camera lens.  I applied Mod Podge directly to the phone cover to adhere the paper and then applied multiple coats over top to seal.

A few additional phone decoupage tips:

Use Mod Podge Matte finish as the gloss finish I find dries tacky!

Be careful and keep your phone dry (Decoupage or not this is always a good tip!)

Always remove the cover from the phone before you start.  (Don’t want any glue finding its way in any of the phone’s electronic components.)

Do not place a decoupage phone on another decoupaged item such as a table.  The two mod podged surfaces will “stick” to each other!

Before Decoupaging, If your phone is under warranty, be sure and check if altering your phone in any way, could void the phone’s warranty (read the fine print)

For a more detailed tutorial, please see Restyle Your Smart Phone.

Restyle your cell phone/smart phone

IMG_20130829_104925